Vacancy expired!
Job Summary:The purpose of the Heatset Creeler is to secure & replenish the Heatset machine with packages of yarn for heat setting. Patrol and monitor the running of the machine.Essential Duties & Responsibilities:Follow all Safety, Plant & Quality GuidelinesSecure packages of yarn and load onto the Heatset creel.Check every tube of yarn before placing on the creel verifying that it is identified exactly as described on the spec sheet.Verify each tube of yarn is of the quality specified on the spec sheet.Put a tube cap on each as soon as it is in position when required on spec sheet.Air Splice the package lead end to the tail of the running end package.Periodically check the thread path. If it is crossed, stop the machine and correct it immediately.Check for slubs and/or chokes in tensioners. Tension is a key factor in run ability. The tensioners must be kept clean.Clean your assignment and work area each shift.Performance Expectations (if applicable):Ability to read and follow printed & spoken instructions & specifications.Able to stand for long periods of time.Hand dexterity sufficient to handle packages and operate splicer or tie weavers' knots as specified.Able to lift & place numerous 12-20 lb. packages per shift.Experience/Education Requirements:High school diploma or equivalent preferred.Read & Write English InstructionsCommunicate with fellow associatesOther Requirements:Overtime is required on occasion.Perform any other duties as assigned.All accidents must be reported immediately.Engineered Floors LLC is an EOE M/F/Disabled/Veteran Employer and a Drugs Don't Work Member.
