Vacancy expired!
Job Title: Tech 3
Reports to: Service Manager
FLSA Status: Non-exempt
Division: HPC
Department: Service
Union: OE/ILWU
Locations: Waipahu
POSITION SUMMARY: Under the general direction of the Service Manager, with little or no supervision, the Tech 3 shall perform highly skilled work in the repairing, reconditioning, testing, and adjusting of all equipment sold by our client.
ESSENTIAL FUNCTIONS:
Removes, installs, reconditions, and repairs engines. Makes necessary adjustments on the engines and to the components in the various systems, such as water pumps, fuel pumps, turbochargers, generators, compressors, coolers, carburetors, and cylinder heads.
Performs diagnostic tests on engines for lack of power, inability and hard to start, misfiring, overheating, excessive oil consumption, and basic tests on charging system.
Removes, installs, and makes repairs and necessary adjustments on the various power train components such as torque converters, torque dividers, direct drive transmissions, power shift transmissions, oil and dry clutches, steering clutches, and brakes, final drives, differentials, transfer cases, gear boxes, and undercarriages.
Performs diagnostic tests on power train components for overheating, operational pressure checks, and slippage.
Removes, installs, reconditions, repairs, and makes necessary adjustments on the various hydraulic controls and components such as cylinders, pumps, valves, and hydraulic attachments.
Performs diagnostic tests on hydraulic systems for operational pressures and flow check.
Must be able to meet flat rate as established by Caterpillar and industry standards.
Contributes to team effort by accomplishing related results as needed.
EDUCATION, EXPERIENCE, AND SKILLS REQUIRED:
Must have a high school diploma or equivalent.
Must have a valid Drivers License with a good driving record.
Must have PC skills.
Must be forklift certified or able to be certified within 60 days.
Must own hand tools that are suitable to perform the work noted above.
At least 8 years of experience preferred.
PHYSICAL DEMANDS:
Walking: Moves about on foot, often through uneven terrain.
Hands/arms: Operates equipment and hand and power tools.
Handling: Seizes, helps, or works with hands.
Lifting: Raises or lowers miscellaneous equipment parts and tools.
Reaching: Extends hands and arms in any direction.
Stooping: Bends body downward and forward by bending at knees or waist.
Standing: Remains in standing position if required to perform various functions of the job.
Climbing: In and out of equipment.
Raising/Lowering: Goes up and down in man lifts.
Vision: Reads work tickets and parts and service books and operates heavy equipment.
Talking: Communicates by radio, phone, and in person.
Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication by radio, phone, and in person.
Sitting: Sits in equipment and vehicles for extended periods.
Laying: Lies in prone position under vehicles and equipment for extended periods.
Lifting: Lifts up to 60lbs. daily, frequent exertion.
ENVIRONMENTAL:
Noise: Works in conditions with constant or intermittent noise.
Temp/Weather: Works outside and in shop with variations of temperature and weather.
Exposure: Subject to foul odors, fumes, and harsh substances.
