ISO someone to reduce the length of mating 2 X 2 boards. The boards are in a overhead conical overlapping arrangement.
They need to be trimmed about 1"to1-1/2" shorter. They are arranged in a circle at elevation above the second floor inside a structure (scaffolding provided). Climbing will be required. There are either 64 or 128 ends depending how much needs trimmed off. When trimmed off, the ends will need to be flush with a certain surface within 1/4". Following the trimming, an aluminum tube, weighing approximately 80 lbs. will need to be inserted into the structure and bolted in place. The job ,will require at least two people.
The scaffolding is shown, and the thing that needs put up is the grey thing on the right end of the scaffold. The 2 x2 s that need trimmed are around the hole at the top.
