The Production Operator is responsible for setting up, loading and operating production machines, and making necessary adjustments to ensure the quality of the product meets required specifications.  The Production Operator may work in one of three areas – Spooling, Stranding or Closing, and is responsible for his/her own safety and the safety of those around the machines. The Production Operator works under the direct supervision of a Production Supervisor and the technical oversight of the Process Engineering and Quality department.Duties & ResponsibilitiesRecord set-up information at the start of each order.Remove empty bobbins from the previously completed order and load full bundles of wire or bobbins using appropriate lifting devices.Weld or knot new wire new supply to trailing end of previous order (if applicable).Thread machine by pulling wire or strands through guides, tension rollers, and/or stranding or pre-forming heads.Secure, install and adjust the proper dies, stranding/pre-forming head, crushing rollers, post-former and carboloy rings as required by the order.Set the proper lay according to order specifications.Adjust tension and die pressure at the beginning of the order and as required throughout the entire order.Start lube pump as required by the order.Inspect and replace tensioning devices as needed.Inspect the set-change, including cutting a strand for helix-height measurement before requesting approval from the production supervisor.Properly tag product, stage in proper storage area, and record all production.Maintain a safe and clean working environment.Perform all job duties in accordance with work instructions and quality standards.Monthly Incentives - (opportunity to earn after probationary training period)Other duties as assigned by management.
