Vacancy expired!
STAMPING MANAGER - $25-$30 HR. West Tulsa, Experienced Manager in the manufacturing, fabrication Punch Press Field, Stamping dies. Highly proficient in Punch Press Operations, Understanding of stamping dies and proper die settings, understanding of punch press feed operations.
FINTUBE OPERATOR - $19/hr + Operator needs to have at least 5 experience running a McElroy
finning machine.
Night Shift – 2 position – Skiatook Location
Ability to set-up and operate finning machines to wrap on or embedded fin strip material on tubes to construct fintubes by reading
blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control
settings, and finning methods and sequences. Mount pans then, aligns, and secures pan in machine. Ability to calculate and sets
machine controls in relationship to work piece and regulate factors such speed, feed, and coolant flow; start machine and observe
and listens to machine operation to detect malfunctions. Ability to feed tubes into the machine and connect other tubes with tube
connectors to continue the finning process; adjusts machine feed and speed to fin tubes according to specifications. Verify
dimensions of finned tubes for conformance to specifications using gauges, calipers, and ruler. Stop machine to change setup
according to required machining sequence or to measure parts for conformance to blueprint specifications; perform oil level checks
and clean machine, tooling, and parts. Perform some machine maintenance.
Mount finning strips rolls into fin strip machine using overhead crane. Less than high school education; or up to one-month
related experience or training; or equivalent combination of education and experience.
POWDER COATING PAINTER - $18-19/hour – Must have 6mths previous Industrial Paint experience –
Cimarron location.
Day Shift- 2 Positions
Night Shift – 3 Positions
Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to
impart specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Read work
orders or receive instructions from supervisor regarding painting. Select premixed paints, or mixes required portions of pigment,
oil, and thinning and drying substances to prepare paint that matches specified colors. Ability to prep product prior/ post painting.
Must be able to use a power spray gun. Must pass Pulmonary Function Test (PFT); must be fitted and be able to wear
respirator. Physically active & must be able to lift to 50 lbs.
ELECTRICAL ASSEMBLER - $14-$17/HR (depending on experience)
Day Shift –6- Marion location
Assembles electrical, equipment, and subassemblies according to customer specifications following drawings and other written
and verbal specifications. Drills, taps, or reams holes, aligns components, and bolts, screws, or rivets them together using hand
tools or portable power tools; bends and installs electrical conduit. Stirps shielding and crimps assorted wires to required work
instructions. Trains, or assists in the training of other employees in assembly processes. 2 years of prior assembly related
experience.
MATERIAL HANDLERS - $18/HR - Cimarron location
Day Shift – 3
Night Shift-3
Loads, unloads, and moves materials within or near plant, yard, or work site. Reads Bill of Material or follows oral instructions to
ascertain materials needed to be prepared for shipment. Conveys materials from storage or work sites to designated area.
Secures lifting attachments to units/ bundles and conveys load to destination or signals crane or hoisting operators to move load
to destination. Attaches identifying tags or labels to materials or marks information on cases, bales, or other containers.
Loads trucks with industrial fork truck; stacks or assembles materials into bundles and bands bundles together. Computer skills is
preferred to cross-train in all areas of the shipping and warehouse departments. Lifts heavy objects by hand or with power hoist,
and cleans work area, machines, and equipment. Assembles crates to contain products such as motors, vib switches, mechanical,
parts orders. Operates industrial truck or overhead cranes to assist in loading or moving materials and products. Minimum of
three years prior experience in a material handling/warehousing position. Prior experience in a manufacturing
environment preferred
MATERIAL HANLDER/FORKLIFT NIGHTS 4PM-3AM SAPULPA
1ST SHIFT BLASTER $17 SAPULPA 5AM-5:00PM
2ND SHIFT BLASTER $18 SAPULPA SAPULPA 5PM-5;00AM
2ND SHIFT PAINT AND BLASTER $19 HR. SAPULPA
1ST SHIFT EXP. INDUSTRIAL PAINTER $17 HR. SAPULPA 5:00AM-5:00PM SAPULPA
2ND SHIFT EXP. INDUSTRIAL PAINTER $18 HR. SAPULPA 5PM-5:00AM SAPULPA
FLUXCORE WELDERS DAYS $22.00 HR. NIGHTS $23.00 HR SAPULPA
FITTERS DAY AND NIGHT SHIFT $22 HR. SAPULPA
Night Shift Tig/Mig Coil/Spool Fitter Welder, will train on days and move to nights $20-$26 hr.
Hem Saw Operator 2 + Years Experienced. $17-$19 hr, Cut 50ft beams. 5:00am-3:30pm Monday-Saturday. North Tulsa
Fitter Welder $24-$27 DOE repairing steel furnace doors 2-4 a month the doors are large and require quite a bit of work. Mig welding, Plasma cutting, gourging, fitting new sections into an old door. Highly proficient in skills. West Tulsa
Shipping/Receiving Clerk at Metal fabrication shop in West Tulsa, $15-$16 hr. have experience, loading and unloading boxes. Able to data entry into computer system. 6:00am-4:30pm shift Monday-Friday. Clean criminal background.
Data Entry Clerk//Forklift/Shipping: $17.00 hr. 5:00am-5:00pm Monday-Saturday Sapulpa
MUST HAVE ACCESS DATA BASE EXPERIENCE. This job requires the individual to work with and around overhead cranes, forklifts, trucks, power equipment, automated equipment and other hazardous processes which requires this job to be classified as a SAFETY SENSITIVE position.
The Data Entry Clerk will perform all computer functions necessary to track various aspects of goods.
The Data Entry Clerk will be transferring data from paper formats into computer files or database systems. Their transfer of data happens manually.
The Data Entry Clerk will type in customers' information and create spreadsheets, verifying them against source documents at different stages during the process.
Data Entry Clerk will also be responsible for generating the production tracking for all departments to use to verify material coming in and going out.
The Data Entry Clerk will also be responsible for generating the packing list for the shipping department to use to verify shipments going out.
The Data Entry Clerk will also be responsible for issuing PO’s and refilling workstations.
The Data Entry Clerk will also cover for the receiving clerk when the receiving clerk is out of office.
Operates lift trucks or hand trucks to convey, move or hoist materials to proper departments or areas.
Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
Workmanship must meet the Company’s quality standards.
Follow Premier safety policies and procedures.
Sustain 5’s requirements.
Skills:
The Data Entry Clerk needs to be fluent in Microsoft Access and Microsoft Excel.
Must demonstrate the desire to perform in a professional manner as a member of a team and give inputs on activities that will help complete project assignments in a timely and efficient manner while upholding the safety and quality standards.
Pass a forklift training class.
Able to read and write basic shop communications.
Able to read drawings.
Experienced CWI Quality Inspector Night Shift 5:00pm-5:00am Monday-Saturday $18-$21.00 hr. Sapulpa
Job description and responsibilities, but not limited to the following
This job requires the individual to work with and around overhead cranes, forklifts, trucks, power equipment, automated equipment and other hazardous processes which requires this job to be classified a SAFETY SENSITIVE position.
Assist Employees with complex drawing configurations to ensure high quality and standards.
Productivity level must consistently equal the Company’s established productivity requirements, as defined by work instructions.
Verifies that incoming receiving parts, manufacturing in-process parts, and finish product meets engineering drawing and specifications.
1st piece inspection - shall check each set-up for conformance to engineering drawings and specifications.
Inspects accuracy of gauges and instruments for conformance to gauge calibration program.
Rejects defective parts (DPR).
Checks parts for accuracy and ensure quality manufacturing techniques
Fill out all establish reports and forms deemed necessary by quality control department.
Workmanship must meet the Company’s quality standards.
Follow Premier safety policies and procedures.
Sustain 5’s requirements.
Skills and Experience
Basic Fabrication and welding experience
Able to operate overhead cranes and power tools
Able to read and work through complex shop drawings and work instructions
Able to use shop tape measure and measurement tools required for the job
Able to learn Atypical shop drawings and understand bill of materials
CWI D1.1 certification is desired
Must have the ability to learn new skills
Must demonstrate the desire to perform in a professional manner as a member of a team and give inputs on activities that will help complete project assignments in a timely and efficient manner while upholding the safety and quality standards
5 YEAR EXP. CNC MACHINE MAINTENANCE $20-$25 HR. 1ST SHIFT BASED ON EXPERIENCE MONDAY-THURSDAY 7AM-3:30PM FANUC CONTROLS, HORIZONTAL AND VERTICAL MACHINING KNOWLEDGE, COMPUTER SKILLS/NAVIGATION
3-5 YR. EXP. CMM PROGRAMMER/INSPECTOR $17-$25 HR. UNDERSTAND GD AND METHODS PER ASME 14.5. DEMONSTRATE EXPERT LEVEL BLUEPRINT READINGS AND MANUFACTURING/INSPECTION RELATED MARH SKILLS AND THE ABILITY TO PROGRAM/EDIT COORDINATE MEASURING MACHINES/SCANNERS CMM. PC-DMIS PREFERRED. ABILITY TO REVIEW AND CRITIQUE AS9102 REPORTS. THEY MAY BE EXPECTRED TO PROVIDE INPUT IN CREATING NEW INSPECTION PROCESSES.
WORK WITH CNC PROGRAMMERS TO DEVELOP CMM PROGRAMS. CREATE MECHANICAL INSPECTION PROCESSES AND PROCEDURES. GOOD KNOWLEGE OF INSPECTION MEASURING EQUIPMENT INCLUDING SURFACE PLATES, MICROMETERS, HEIGHT GAUGES, RADIUS GAUGES, PROTRACTORS, PROFILOMETERS, BORE GAUGES, DIAL INDICATORS, AND COORDINATE MEASURING MACHINE/SCANNERS. BLUEPRINT READING AND BASIC MATH. MUST HAVE CMM PROGRAMMING,
MECHANICAL INSPECTION, CREATE DIAGRMS AND WORK INSTRUCTIONS PROCESSESS. CMM SOFTWARE, FAMILIARITY WITH CADCAM SOFTWARE. HAVE AT LEAST 3 YEARS OF AEROSPACE OR MACHINE SHOP EXPERIENCE HAVE GED OR H.S. DIPLOMA
EXPERIENCED SAFETY COMPLIANCE OFFICER$16-$18 HR. THIS ROLE WILL MAKE MODIFICATIONS TO THE FACILITY THAT HELP SAFETY STANDARDS. FORKLIFT EXPERIENCE.
EXP. CNC LASER OPERATOR NIGHT SHIFT WEST TULSA $18.00 HR.
MATERIAL HANLDER/FORKLIFT NIGHTS 4PM-3AM SAPULPA
1ST SHIFT BLASTER $17 SAPULPA 5AM-5:00PM
2ND SHIFT BLASTER $18 SAPULPA SAPULPA 5PM-5;00AM
2ND SHIFT PAINT AND BLASTER $19 HR. SAPULPA
1ST SHIFT EXP. INDUSTRIAL PAINTER $17 HR. SAPULPA 5:00AM-5:00PM SAPULPA
2ND SHIFT EXP. INDUSTRIAL PAINTER $18 HR. SAPULPA 5PM-5:00AM SAPULPA
FLUXCORE WELDERS DAYS $22.00 HR. NIGHTS $23.00 HR SAPULPA
FITTERS DAY AND NIGHT SHIFT $22 HR. SAPULPA
EXPERIENCED TIG WELDER WITH EXOTIC METALS, BRASS, INCONEL, TITANIUM. $24-$28 HR. SOUTH TULSA. 6:30AM-5:00PM MONDAY-FRIDAY
FINTUBE OPERATOR EXPERIENCED IN CATOOSA $19 HR. set up operate finning machines to wrap on or embedded fin strip material on tubes read tape measure, set up procedures, control settings, and finning methods. use overhead cranes.
POWDER COATER PAINTER: $18-$19 EXPERIENCED DAY OR NIGHT SHIFTS IN CATOOSA
3RD SHIFT FOAM BAILER. WILL BAIL FOAM INTO MACHINE. HOURS 7:00PM-05:30AM SUNDAY-WEDNESDAY EAST TULSA AREA $15 HR.
NIGHT SHIFT VESSEL WELDERS WITH VESSEL EXPERIENCE IN SAPULPA , MONDAY-SATURDAYS 5:00PM - 3:00AM OVERTIME AS NEEDED,
NIGHT SHIFT YARD HAND/FORKLIFT EXP. WITH MOVING STEEL IN YARD, WILL WORK OUTSIDE, STAGING MATERIAL FOR LOADING, PULLING MATERIALS IN SAPULPA 4:00PM-2:30AM MONDAY-SATURDAY $17 HR,
INDUSTRIAL SEWER TO SEW VINYL COVERINGS FOR SEATS $15 HR DAY SHIFT 5:30AM-4:00PM
5 YEAR EXP. CLASS B PIPE VESSEL FITTER $20 HR. DAY SHIFT LAYOUT MATERIALS, FIT UP MATERIALS, READ BLUEPRINTS AND SHOP PRINTS, GOOD MATH SKILLS. EAST TULSA
EXTERMINATING SPRAY TECH, WILL TRAIN RIGHT PERSON. MUST HAVE CLEAN MOTOR VEHICLE RECORD, VALID OKLA. DRIVER LICENSE, CLEAN BACKGROUND. 7AM-7PM MONDAY-FRIDAY $16-$18 HR.
FLUXCORE WELDERS $21 HR. DAYS 3/8' UPHILL WITH 1' BEVEL , BENT AND XRAY SAPULPA
FLUXCORE WELDERS $22 NIGHT SHIFT 3/8' UPHILL WITH 1' BEVEL , BENT AND XRAY SAPULPA
FITTERS DAY SHIFT $21.00 FITTERS NIGHTS $22.00 SAPULPA
NIGHT EXP. HEAVY HOSE SAND BLASTERS $18 HR. SAPULPA
DAY SHIFT PAINTERS $18 HR. WILL NEED TO SANDBLAST ALSO. SAPULPA
NIGHT SHIFT EXP. MATERIAL HANDLER $18, WILL TRAIN ON DAYS AND MOVE TO NIGHTS SAPULPA
BRAKE PRESS OPERATOR $17 HR. DAYS AND NIGHT SHIFT EAST TULSA
ORDER PULLERS FOR WAREHOUSE. DAY SHIFTS $13 HR. MIDTOWN TULSA AREA.
DEBURR POSITION METAL PARTS IN A CLIMATE CONTROLLED ENVIRONMENT IN BROKEN ARROW AREA. $16 HR. STEEL TOED BOOTS. FAA ENVIRONMENT. MUST HAVE CLEAN BACKGROUND.
GREASE AND OIL PACKAGING ASSISTANT $16 HR DAYS 6AM-4:30-PM WILL PACKAGE GREASE AND OIL, READ GAUGES AND METERS LIFT 50LBS. WORKING IN HOT TEMPATURES. WEST TULSA
MOTOR OIL KETTLE ASSISTANT NIGHT SHIFT 3PM-11PM. WILL WEAR RESPIRATOR TO COOK MOTOR OIL AND GREASE. HOT TEMPSL WILL CLEAN SPILLS AND DRIPS. $17 HR WEST TULSA
IRON WORKER MUST READ TAPE MEASURE. $15 HR, NORTH TULSA
NIGHT SHIFT 2 YR EXPERIENCED CNC MACHINIST $20+ DOE HOURS; 2:15PM-12:45AM MONDAY THRU THURSDAY
CNC MILLS , LATHES, FLUENT IN G CODES AND EDITS. HAAS EXP IS A PLUS
PRESS BRAKE OPERATORS $19-$26 hr. Depending on exp. Must have 2 years experienced running CNC and Manual brake presses. Must read tape measure 100%, will test. and have some heavy industrial experience. Must be dependable and on time to work.
Day shift 5:00am-3:30pm overtime as needed either Saturdays or Sundays 5 hours either day 5am-10am.
Night shift 3:00pm-1:30am overtime as needed. West Tulsa
Fabrication Shop Prep - Day shift 6am-4:30pm Set up saws, rolls, press brakes, punching and drilling equipment. Able to layout parts. Use grinders to clean welds. Ensuring welders and operators have the required materials and tools available. Complying with all safety procedures and regulations. Lift 70lbs. Read blueprints/drawings, Work 10 hours a day. Read and understand measuring tools and equipment. Knowledge of various types of metals. $15-$20 hr. Depending on experience.
PLATE ROLLER/BRAKE PRESS OPERATOR 2 YEAR EXPERIENCED $18.00 hr. Must read tape measure, drive forklift and operate overhead crane. Sapulpa
QUALITY CONTROL INSPECTOR - 5 Year Experience. NDE Certs SNT-TC-1A, VT Level II or AWS, CWI, MT Level II, PT Level II RT Level II are preferred. P&ID Drawings, Read blueprints perform and layout and fitting inspections. work in ERP Systems. ISO environment. Ability to calculate arc lengths and angles for layout of cylindrical vessels is required. Perform and document quality inspections. drawings, codes, and specifications. WIP processes comply with ASME code and QMS requirements. Verify accuracy in measurement equipment. Follow and record inspection test plan data. Assist NDE Technicians, Authorized Inspectors and TPI's
BURNING FURNACE KILN OPERATOR - $17.00 HR. Transfer kiln cars in and out of burners. Monitor the kiln for temp adjustments. Make changes to temp as needed. Change out burners. Monitor brick quality. 1 year furnace experience, computer literate, problem solver. North Tulsa
NIGHT SHIFT 2:00PM-10:00PM HEAVY HOSE SANDBLASTER $15 HR. NORTH TULSA
SHIPPING AT AUTO PARTS WAREHOUSE $13 HR.
INDUSTRIAL SEWING MACHINE SEWER WILL SEW VINAL COVERINGS FOR BUS SEATS $15 HR WORK 5:00AM-4:30PM MONDAY-THURSDAY
Deburr Tech $16 hr. Work in climate controlled facility in South Tulsa 8am-4:30pm Monday-Friday
TOOL ROOM ATTENDANT $18-$22 HR. 6AM-4:30M 1 year previous experience, prepare and maintain inventory and incoming and outgoing tools and parts. Issue equipment to workers while keeping a current use log. Basic computer skills, Read and understand tools and equipment. Operate forklifts, lift and move up to 75lbs. North Tulsa
MAINTENANCE TECH: Experience in repairing both air and electrical tools, knowledge of various welding machinery along with heavy haul vehicles and a variety of electrical needs. Industrial electrical 110"Vm 220V, 480V, overhead bridge crane repair, Repair industrial trucks from 5000# up to 33,000# units. Diesel semi trailers from RGN's to flat beds to 5 axle heavy haul. Knowledge of Miller, Lincoln, Fronius welders. $18-$22 hr. 6am-4:30pm North Tulsa
FACILITIES TECHNICIAN - $23+ (depending on experience)
Day Shift – PORT OF CATOOSA
MUST HAVE JOURNEYMAN ELECTRICIAN EXPERIENCE
Facilities daily building operations. Repairs malfunctioning systems. Works with maintenance concerns and system upkeep. Troubleshoots a variety building infrastructure systems. Ensures preventative measures satisfy safety standards. Performs monthly inspections on all production equipment and replacement parts. May collaborate with building management towards the renovation and improvement of facilities systems. May report maintenance metrics to management. Confers with department managers to coordinate monthly inspections. Must have a valid driver’s license to be able to drive to different locations within the Port. Regular attendance, ability to arrive at work punctually, ability to work on–site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. High school diploma or general education degree (GED). Two – three years of experience is preferred. Must have electrical, plumbing, and HVAC systems, and indoor and outdoor building repair experience.
Shop Diesel Mechanic -5 Years Exp. Troubleshoot, Preventive repair engines, pumps, transmissions, etc. , electrical, hydraulic systems. $20-$25 hr.
Trailer Tech 3 Year Experienced $20-$25 hr. repairs product line equipment. preventive maintenance and lubrication on selected auxiliary equipment, diagnose, preventive test tractor trailer equipment. brakes, hydraulics, ABS brake systems. Have welding skills. electrical equipment, replace parts, and document repairs.
Field Service Techs $20-$25 hr. Diagnose, install, repair on service calls. Onsite repairs on breakdowns on diesel engines. give technical advise to customers. inspect and diagnose equipment for faults and completeness. Troubleshoot to determine equipment faults. repair equipment by adjusting, aligning, replacing components. Have Valid CDL A license ro test diesel trucks.
Plasma Table Programmer – 6:00am-4:30pm
This position requires Plasma Table Programming knowledge and experience. As a Messer
Plasma Table Programmer you will play a crucial role in our manufacturing
process by programming and operating our Messer plasma cutting tables. Your expertise in Burn
Table programming and machine operation will be essential to ensure precise and efficient cutting
of various materials, meeting our production deadlines, and maintaining the highest quality
standards.
Requirements of Operator
Candidate should have at least 2-3 years of previous experience.
Proficiency in Plasma Table programming software(s), and AutoCAD software.
Strong technical and mechanical aptitude with the ability to troubleshoot and perform basic
machine maintenance.
Understanding of beveling, post processing (rolling/breaking), and the specific requirements for
plasma cutting.
Excellent attention to detail and a commitment to producing high-quality work.
Strong organizational skills and the ability to manage multiple tasks and priorities effectively.
A commitment to workplace safety and the ability to adhere to safety protocols.
Job Type: Day Shift
Pay Range: $20.00 - $25.00 per hour
Excellent full-time employee benefit package includes:
100% company paid health/dental insurance for employee and their family
Bonus paid for good attendance and safety record
401(k) Savings Plan
Paid Holidays & Vacations
All employees are expected to be drug free and must pass a drug test before employment begins
SHIPPING/RECEIVING/SIT DOWN FORKIFT, MOVING STEEL $16-$18 HR, 7:00AM-3:30PM WEST TULSA
Structural/Vessel Fitter Welder – Days 6:00am-3:30pm Night Shift5:00pm,-3:30am
This position requires experience working in a steel fabrication industry and proficient welding with fluxcore wire. Familiarity with structural steel shop fabrication tools and machinery Layout, fit and weld
fabricated components to assemble structural forms. Clamp and tack-weld parts to secure position for
welding. Operate cutting torch, plasma torch, small saw machine and iron machine. Able to safely
transfer or position pieces manually using overhead or jib cranes. Perform 100% first article
inspections by visual examine work piece. Measure part of hole dimension or sizes, square,
flatness and other drawing instructions. Set up welding machine and welding gun:
assemble/disassemble welding tips and it liner, wire feed and voltage, using arc or gas-shielded
arc welding equipment.
Requirements of Structural/Vessel Fitter Welder
At least 3 years of experience in manufacturing setting as a structural fitter.
Able to lift/maneuver up to 70lbs., unassisted.
Capable to stand/sit or walk for up to 10 hours per day.
Read and understand measuring tools and equipment.
Operate overhead cranes and forklifts.
Knowledge of abrasives, and condition of metal and attachments to grinder.
Good communication, multi-tasking skills and attention to detail.
Keeping area clean and organized.
Job Type: Both Day of Night
Pay Range: $20.00 - $25.00 per hour
Excellent full-time employee benefit package includes:
100% company paid health/dental insurance for employee and their family
Bonus paid for good attendance and safety record
401(k) Savings Plan
Paid Holidays & Vacations, All employees are expected to be drug free and must pass a drug test before employment begins
ASME CODE WELDER DAYS 6:00am-3:30pm NIGHT SHIFT 5:00pm-3:30am
Tulsa based fabrication shop is looking for experienced ASME Code Welders (X-ray quality) for
full-time employment. perform high-quality welding work in accordance with ASME codes and
standards. The successful candidate will be responsible for welding various materials, including
carbon steel, stainless steel, and any other alloys, in all positions to meet the project specifications
and industry standards. This position is vital in ensuring the structural integrity and safety of our
projects. Must be able to pass an ASME code-compliant welding test (3g flux core). Mig and Stick
welding experience is a plus. Pay is based on skill, performance, and shift worked.
Requirements of Operator
Candidate should have at least 3 years of previous ASME Code welding experience.
Proficiency in various welding techniques, including Flux-Core.
Read and interpret engineering drawings, blueprints, and welding procedures.
Perform welding operations in compliance with ASME codes and standards.
Conduct visual inspections of welds to ensure quality and compliance.
Maintain a clean and safe work environment.
Always adhere to safety protocols and guidelines.
Job Type: Day or Night Shift
Pay Range: potential of $70,000 - $90,000 yearly
Excellent full-time employee benefit package includes:
100% company paid health/dental insurance for employee and their family
Bonus paid for good attendance and safety record
401(k) Savings Plan
Paid Holidays & Vacations
All employees are expected to be drug free and must pass a drug test before employment begins
Maintenance Technician Day Shift 6am-3:30pm
Knowledge in the below listed areas:
Industrial electrical 110Vm 220V, 480V
Repairing both air and electrical tools
Over-head bridge cranes
Industrial trucks from 5000# up to 33,000# units
Diesel semi tractors
Semi-trailers from RGN’s to flat beds to 5 axle heavy haul
Knowledge of Miller, Lincoln, Fronius welders
Willingness to learn and be an active part of our existing maintenance team
Job Type: Day Shift
Pay Range: $18.00 – 22.00 per hour
Excellent full-time employee benefit package includes:
100% company paid health/dental insurance for employee and their family
Bonus paid for good attendance and safety record
401(k) Savings Plan
Paid Holidays & Vacations
All employees are expected to be drug free and must pass a drug test before employment begins
ASME CODE WELDERS DAYS AND NIGHTS $70,000-$90,000 YR.
FLUXCORE WELDERS DAYS $21.00 SAPULPA
FLUXCORE WELDERS NIGHTS $22.00 HR. SAPULPA
FITTER WELDERS $21.00 DAYS SAPULPA
FITTER WELDERS $22.0 NIGHTS SAULPA
Steel Shop Helper Day shift $15 Night shifts $16
Press Brake Operators $18.00 hr day and night shifts
Laser Helper day shift $15 West Tulsa, operate grinder, drill press, tapping parts, beveling, countersinking, read prints
Brake Press Helpers $16 night shift Shop helper experienced/deburring position in climate controlled shop 61st/Garnett M-F 8:00am-4:30pm $16 hr.
Quality Inspector/Document Control $19-$20 Hr. Days
CNC Punch Press $14-$15 hr. Need shop/manufacturing experience will load material and unload and hit the run button.
CNC Laser Operator $19-$20 hr. Days West Tulsa
Bilingual Brick Packaging $16.50 Day shift North Tulsa
Bilingual Drywall Mud Mixers in Broken Arrow, Days $15 hr,
Metal Scrap Yard Sorters Days $14 hr.
Tig Welder Experienced with exotic metals, brass/titanium/aluminum $25-$30 DOE
Mig Fitter Welder, hard wire mig welding, spray arc production, read blueprints and basic measurement equipment $19-20 hr. Days
Structural Vessel Fitter Welder Day and Night Shifts 3 years exp. $20-$25Hr.
Header Welders $22-$25 nights Catoosa
Header CNC Drill $19+ Nights Catoosa
Blaster Painter $17 Nights Catoosa
Structural Fitter Welder $22+ Nights Catoosa
Structural Louver Assembler $18.50-$22 hr. Day shift Catoosa
Header SubArc $22+ nights Catoosa
Maintenance Tech $26.00 hr. Catoosa
Powder Coater Painter $18-$19 hr, Days Catoosa
Material Handlers $18 hr. Catoosa Days
Structural Fitter Helpers Nights, Must Mig weld, TWS school graduate, read tape, have hood. Nights $19 Catoosa
Laser Operators $17- $20 hr.
Material Handers/Forklift $17.00 Day Shift Sapulpa
Roll Operator/Press Brake Operator $22.00 Hr. Night shift North Tulsa
Sandblaster Heavy Hose Nights $15 North Tulsa
Night Grinder $16 hr. forklift and overhead crane experience West Tulsa
Shipping/Receiving - West Tulsa, pulling parts, wrapping parts, load and unload trucks/forklift certification $16 days
CNC punch press no programming assist press brake area $16 days
Bilingual Spanish/English Brick Packager $16.50 hr. North Tulsa
Metal Fan Assembly $14 West Tulsa
Concrete Precast, Days $15 hr, tie rebar, pour concrete in molds
Material Handlers/forklift $17 Days and Night shifts Sapulpa
Hear Exchanger Assembly Day/Nights $19+ Port of Catoosa
CDL A Driver/Flatbed Ties down, Strap down experience. Must have clean MVR, will work in warehouse when not delivering. $20.00 hr West Tulsa
Steel Shop Helpers $15.00 days/ $16.00 Nights Overhead crane/forklift North Tulsa
Experience Press Brake Helpers/Roll Operators $20 Day shift Sapulpa
CNC Punch no programming, assists press brake area $16 hr. West Tulsa
Industrial Painters/Blast $18+ hr.
CNC and Manual Press brake Sapulpa Days/Night shifts $19+
Tool and Die Machinist 7 years exp. $25-$30 hr.
Stamping Manager 7 yrs exp. $25-$30 stamp presses, brakes, die setting West Tulsa
Maintenance Tech - Electrical/Mechanical, repair machinery, PLC'S, VFD'S welding skills $25.00 West Tulsa
Shipping/Receiving/Inventory data, accurate billing and inventory control $18.00 West Tulsa
Metal Fan/Louver Assembly $14.00 Sand Springs Days
Shop Helpers - Grinding, putting materials in machines $14 hr. 2nd shift
Come in and fill out an application for interviews Monday-Thursday 9:00am - 3:00pm.
LRP - Lloyd Richards Personnel
4619 S. Harvard, go in the south door.
Tulsa, OK 74105
918-742-5300
BRING DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-3:00PM
TO APPLY ONLINE, CLICK THIS LINK: https://20181214161626mw47d1g3cqpx5xdn.applytojob.com/apply/dITWd2DxGB/Lloyd-Richards-Personnel-Application?source=Craigslist