Brazer 3rd shift - $23.69/hour with increase after 90 days Experience needed

Brazer 3rd shift - $23.69/hour with increase after 90 days Experience needed

02 May 2024
Pennsylvania, York, 17401 York USA

Brazer 3rd shift - $23.69/hour with increase after 90 days Experience needed

Reference #: 20348710

ESSENTIAL DUTIES & RESPONSIBILITIES INCLUDE THE FOLLOWING. OTHER DUTIES MAY BE ASSIGNEDObtains appropriate paperwork or drawings for each coil/header.

Positions header parts in jigs or fixtures on table & clamps parts together.

Selects torch, torch tip, filler rod and flux, according to material being brazed.

Connects regulator valves and hoses to oxygen and fuel gas cylinders, and brazing torch.

Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure, to obtain desired flame.

Holds torch at proper angle to metal and guides along braze joint, applying filler rod to molten area to form weld.

Examines braze joint for leaks.

Locates and repairs leaks in header or coil assembly.

Applies, and fills out if necessary, all required coil/header labels.

Builds tall coils (i.e. assembles coil halves together).

Signs off shop floor paperwork signifying completion of job.

Trains new or existing employees if necessary.

Wears all required personal protective equipment.

Cleans work area at end of shift.

Responsible for reporting work related injuries and near misses to supervision.

Responsible for wearing all required PPE and following applicable safety/environmental rules.

Responsible for correcting or reporting unsafe conditions observed within the plant.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.EDUCATION/EXPERIENCELess than high school education; or up to one month related experience or training; or equivalent combination of education and experience.

LANGUAGE ABILITYAbility to read and comprehend simple instructions, short correspondence, and memos (i.e. safety rules, operating and maintenance instructions, shop-floor paperwork, and procedure manuals).MATH ABILITYAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.REASONING ABILITYAbility to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.COMPUTER SKILLSNo computer skills required.

CERTIFICATES & LICENSESBrazing certification required. Must be able to obtain within one (1) month.

WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is frequently exposed to wet or humid conditions (non-weather). The noise level in the work environment is usually moderate.PHYSICAL REQUIREMENTSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand and walk. The employee is occasionally required to stoop, kneel, crouch, or crawl and talk or hear. The frequency of these requirements may vary depending on the brazing job at the time (i.e header brazers, test tank operators, etc). The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities equired by this job include Close vision, Peripheral vision, Depth perception and Ability to adjust focus.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit . If you are an individual with a disability and you require an accommodation during the application process, please visit .Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou.

Related jobs

  • Reference #: oS5dtfwn95c2aaefd3 Description Build your Career with an Industry Leader Multi-Color Corporation and Fort Dearborn have merged and are now the world\'s largest prime label and packaging supplier. Join the new MCC and you will have theopportunity to become part of an organization that is committed to excellence and industry leadership for over 110 years. We are currently looking for a Press Operator Assistant to join our team. The Press Assistant role is responsible for the set up and support of printing presses in accordance with the printing specifications and customer requirements/expectations.

  • Job Title: Pipe Welder

  • Description:

  • Job Title: Maintenance Manager

  • Reference #: oPYUtfwUb3c00df560 Description Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Packer is tasked with inspecting, banding and shrink wrapping stacks of finished labels as well as assembling and packing boxes of finished labels. Meets safety, production, sustainability, and quality standards. Interacts with other departments to achieve company\'s core strategies. This is an entry level role that we intend to grow into other positions within the company. Why work at MCC: Compensation: $17.50 hourly + $1.00 shift premium Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Responsibilities: Inspects finished labels to ensure quality. Bands and shrink wraps stacks of finished labels. Assembles corrugated boxes or trays. Packs finished labels in boxes for shipment. Stacks boxes on pallet for shipment. Completes required documentation in an accurate and prompt manner. Operates a pallet jack. Complies with established facility safety policies and procedures, other work instructions, and other regulations (IE: ISO, GMA SAFE, HAACP) as applicable. Interacts and behaves professionally. Treats all associates respectfully and professionally while maintaining company code of ethics. Responsible for maintaining daily housekeeping efforts which may include painting and cleaning of facility (interior and exterior). Travels as necessary. Other duties as assigned. Qualifications: Able to spend full shift standing up Positive attitude The physical demands require standing, using hands to feel and touch; reach with arms and hands; talk and hear. This position requires frequent walking. Occasionally employee is required to climb or balance, stoop, kneel, crouch or crawl. Must be able to regularly lift or move up to 50 pounds. Specific vision requirements are close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates\' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples\' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #YORKIND

  • Career Area:

  • Industrial Maintenance Technician, 1st Shift - 1053

Job Details

Jocancy Online Job Portal by jobSearchi.