PRIMARY DUTIES AND RESPONSIBILITIES:
Mixing up concrete on building sites ready for pouring
Pouring and smoothing concrete to ensure a level surface
Spreading and shaping concrete to incorporate unique designs
Sealing concrete to protect the life of the concrete
Installing wiring mesh correctly to keep the concrete in place
Taking appropriate measures when setting up the project to ensure no defects after pouring the concrete
Interpreting blueprints and reading survey stakes to establish appropriate grades
Ensuring that worksites are prepared for concrete footings and concrete forms are assembled in certain locations
Loading and unloading materials, supplies, and work tools to and from trucks and the construction site
Ensuring that objects or equipment is in the appropriate place where they are needed
Construction and installation of concrete forms.
Cuts, bends, and shapes rebar for concrete forms.
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float. Not primary, but ability
Mold expansion joints and edges, using edging tools, jointers, and straightedge.
Operate power vibrator to compact concrete.
Edging of concrete pour, floating of concrete.
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
Use of appropriate hand tools for hammer, 4’ level, pry bar, cum-along, clamps, soft excavation, shovel, rake, pickax, etc.
Assembles and fastens with appropriate fasteners such as nails, pins, screws, bolts, and clamps.
Verifies installation of forms with appropriate tools such as string line, plumb bob, carpenter’s level, and/or framing square
Use of a Transit and Level for elevation / grade measurements
Knowledge of crane signals for movement of concrete buckets and materials
Uses tools such as a rod bender, tape plumb bob, level, and chalk line.
Use of a tape measure.
Knowledge of spacing requirements.
Studies construction drawings, sketches, building plans, and specifications for information pertaining to requirements and dimensions.
Prepares layouts using appropriate tools.
Fabricates materials to prescribed measurements using appropriate tools such as hand or power saws, chisels, and planes.
Material identification by type and dimension. Determines type, size, and quantity of materials needed.
Use of tagline to unload materials and equipment.
Mathematic skills as they pertain to job activities.
Knowledge of construction terminology.
Read and understand the work safety permits.
Pouring and finishing of concrete- as needed (not primary duty)
Basic rigging knowledge
Maintains a clean and orderly work environment and maintains housekeeping of job site.
Returns all tools and materials used by the crew to the proper place at the end of shift.
Must fully participate in the safety assessment of the job and completion of JSA’s.
Fully participate in health, safety, quality and environmental processes.
Is an ambassador for Bowen to the client, other contractors, and to the public.
Provide leadership and knowledge to employees in lower classifications.
Not only works well as part of a team but promotes team values for others.
Must be willing to contribute to the development of other employees, including on the job training for Rod busters, Carpenter helpers, and Laborers.
ESSENTIAL SKILLS AND EXPERIENCE:
Must comply with Bowen’s drug and alcohol policy.
May be required to pass physical examination (pre-employment if necessary) as required by Bowen.
Must be able to climb ladders and stairways.
Must be able to carry 50 lbs. of tools and/or materials.
Must be able to work at elevated heights as well as in confined spaces. (towers, vessels, excavations, etc.)
Must be able to work extended hours on your feet on uneven surfaces. (dirt, concrete, asphalt, mud, gravel, etc.)
Must be able to work while wearing a respirator and other PPE, when required.
Must be able to pass applicable site-specific safety training.
Must undertake the appropriate safety/environmental training commensurate with the position and location.
Must be able to read and understand safety instructions, signs, labels and permits in English.
REQUIREMENTS:
Minimum of 3 years’ experience in similar type carpentry work.
Must be willing to attend continued training required by Bowen when deemed necessary.
Must pass a craft-specific test (either written, performance or both when required)
PREFERRED:
High school education
Layout training
Familiar with tall wall formwork construction
