Call ASAP
Application hours - Mon-Thurs 9:00am - 12:00pm
Bring two forms of I.D.
One time visit to the office to apply:
8803 Whittier Blvd
Pico Rivera CA 90606
Sets up and controls plating equipment to coat metal objects electrolytically with albaloy, gold, silver, palladium nickel, nickel, electroless nickel, copper, tin and tin lead to provide protective or functional surfaces or to build up worn surfaces according to specifications:
Reads work order to determine size and composition of object to be plated; type concentration and temperature of plating solution; type and thickness and location of specified plating metal; and amount of electrical current and time required to complete plating process.
Immerses object in cleaning and rinsing baths [METAL-CLEANER, IMMERSION (any industry)].
Suspends object, such as rack of wired parts, from cathode rod (negative terminal) and immerses object in plating solution.
Suspends stick or piece of plating metal from anode (positive terminal) and immerses metal in plating solution.
Moves controls on rectifier to adjust flow of current through plating solution from anode to cathode and to permit electrodeposition of metal on object.
Removes plated object from solution at periodic intervals and confers with quality control department to ensure conformance to specifications.
Adjusts voltage and amperage based on observation.
Examines object visually at end of process.
Rinses object in water and dries object to maintain clean even surface.
May mix, and test strength of plating solution, using instruments and chemical tests. May plate small objects, such as nuts or bolts, using motor-driven barrel.
May direct other workers performing variety of duties, such as racking, cleaning, or plating objects.
