AIRCRAFT MECHANIC

AIRCRAFT MECHANIC

07 Nov 2024
Colorado, Buckleyafb 00000 Buckleyafb USA

AIRCRAFT MECHANIC

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a AIRCRAFT MECHANIC, Position Description Number D0483000/D0484000/D1063000 and is part of the CO AASF, National Guard. Responsibilities WG-10: Responsibility for the performance of the full range of aircraft maintenance duties including troubleshooting, preventive maintenance, repair, and ground testing of assemblies, system, and surfaces for one or more types of military aircraft, fixed and rotary wing. Perform inspections, functional checks, and preventive maintenance on assigned aircraft to include pre-inspection, daily inspection, pre- and post-flight inspections and such special inspections as required, including fuel contamination checks, oil sampling, an inspection of onboard emergency equipment. Troubleshoots, diagnoses, and performs unscheduled maintenance on assigned and transient aircraft. May be required to perform such additional duties as firefighting, aircraft crash/rescue, snow removal, etc. Perform other duties as assigned. WG-11: Perform duties and has responsibilities understood under the military designation of Crew Chief which involves full maintenance responsibility for a required minimum number of aircraft as determined by type of aircraft. Performs Crew Chief duties with full maintenance responsibility for assigned aircraft. Performs the full range of preventive maintenance, repair, and ground testing of aircraft system, assemblies, and surfaces. Plans and conducts a flight training program for drill status crew chiefs to include maintenance instruction for assigned aircraft, the use of hand and arm signals used, ground handling of aircraft, use of ground equipment, aircraft loading, hoist operations, emergency procedures, etc. Performs other duties as assigned. WG-12: The purpose of this position is to act as the Aircraft Mechanic (Crew Chief) with responsibility for managing the operational readiness of one or more aircraft, and proficiency training of supported aviation unit personnel. Manages, monitors or performs overall maintenance, servicing, inspections and documentation for one or more highly technical, high performance military aircraft. Ensures Unit Level Logistics-Aviation (ULLS-A) and other aircraft documentation accurately reflects status and airworthiness of assigned aircraft. Clears Red X status symbols on aircraft forms for work performed by others. Plans, develops and conducts proficiency training during the technician work week to a multi-faceted workforce comprised of Full Time Support (FTS) and supported unit personnel. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and support exercises. Complies with safety, fire, security, environmental, and housekeeping regulations. Performs other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: E-3 thru E-7 Preferred Compatible Military Assignments: 15T MOS 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet each specialized experience listed below. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet. You will be immediately disqualified if you fail to include specialized experience in your resume. WG-10/11/12 must have at least 18 months of Specialized Experience in each of the following: 1. Experience installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. 2. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. 3. Experience instructing lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container. Education Education cannot be substituted for Specialized Experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). 1. If you would like to inquire about joining the Colorado Army National Guard, please contact (720) 250-1351. 2. PCS funds are not available (unless otherwise stated). 3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337. 4. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions. 5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.) 6. Unless stated otherwise: Must be fully qualified or able to obtain MOS within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted MOS listed in this announcement - you will need that MOS to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions. 7. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates. 8. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment. 9. We use E-Verify to verify the identity and employment eligibility of all persons hired.

Related jobs

  • Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SHEET METAL MECHANIC SUPERVISOR, Position Description Number D0791000 and is part of the CO 140th MXS, National Guard. Responsibilities Plans and schedules specific work assignments on a daily or project-by project basis within specified time requirements. Arranges for adequate personnel, materials and equipment to accomplish the work. Assigns tasks to be performed. Recommends individuals to fill vacancies or for promotion or reassignment. Performs the nonsupervisory functions of the organizational segment supervised. Implements safety regulatory requirements. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. Performs other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: E-7 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant\'s RESUME must provide, in detail, how they meet each specialized experience listed below. 3. It must be documented with \"from (mm/yy)\" and \"to (mm/yy)\" dates and description of the specialized experience. 4. If education or a degree is required as part of the \"Specialized Experience\", you must include transcripts. DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet. You will be immediately disqualified if you fail to include specialized experience in your resume. Must have at least 18 months of Specialized Experience in each of the following: Experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments. Experience which demonstrates the ability to plan, direct, and organize work assignments for lower grade personnel. Experience or training which demonstrates that the candidate has the ability to organize assignments for subordinates, estimate material and manpower needed for specific jobs; able to explain manuals and work procedures; and to prepare production records, work records and reports. Education Education cannot be substituted for Specialized Experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). 1. If you would like to inquire about joining the Colorado Army National Guard, please contact (720) 250-1351. 2. If you would like to inquire about joining the Colorado Air National Guard, please contact Recruiting Office Supervisor at 720-847-9423. 3. PCS funds are not available (unless otherwise stated). 4. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337. 5. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions. 6. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.) 7. Unless stated otherwise: Must be fully qualified or able to obtain MOS/AFSC within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted MOS/AFSC listed in this announcement - you will need that MOS/AFSC to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions. 8. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates. 9. Unless stated otherwise: If this position is posted as an Indefinite Technician, it may be converted to Permanent without further competition. Please contact the HRO with any questions regarding employment status. 10. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment. 11. Current COANG Technicians and AGRs hired for a position in which an MCR is required will remain in their current status unless/until the MCR is approved. In the event the MCR is not approved, they are accepting the position in their current status. 12. We use E-Verify to verify the identity and employment eligibility of all persons hired.

  • Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a DEPUTY AIRCRAFT MAINTENANCE OFFICER, Position Description Number D1813000 and is part of the CO 140 MXG, National Guard. The primary purpose of this position is to serve as the full assistant to the Aircraft Maintenance Officer, with responsibility for directing, and managing the Aircraft Maintenance Group. Responsibilities Collaborates with the Wing Commander and other Group Commanders to plan, develop and implement numerous long term plans to include: the Wing Strategic Plan (mission, goals, values, objectives, etc.), the Base Master Plan (facilities), Communications/Computer Plan (infrastructure capabilities/upgrade), the Vehicle Replacement Plan, Four Year Deployment Plan, Aircraft Modification Plan, Depot Input Plan, force management and recruiting/retention plans, weapon system conversions, base supplements to tasking operational plans, operational planning for Aerospace Expeditionary Forces (AEF) participation, and others. Through subordinate functional supervisors, directs and supervises staff and production functions affecting very complex high-performance aircraft with a wide variety of high cost, sophisticated systems, controlling approximately two thirds of base dollars. Plans, organizes, schedules, controls, and directs all unit aircraft maintenance resources to meet mission requirements. Plans, schedules, controls and directs the use of all resources to assure timely, effective and complete support of mission requirements. Plans and institutes fiscal policies to implement Federal law and higher headquarters directives. Coordinates with the operations and maintenance groups to ensure an integrated approach to the solution of problems relating to availability of aircraft, and the ability to conduct the military mission. Plans, implements, and executes contingency operations involving from two to six like units in support of Aerospace Expeditionary Forces. Represents and speaks for the Wing Commander, with representatives of the National Guard Bureau, the Adjutant General, USP&FO, other military components, state/local governments, business and other public/private groups or organizations and persons having an interest in the programs of the wing/group. Meets at least semi-annually with other Maintenance Group Commanders, of the same and/or different mission design series, to advise on policies and procedures affecting the Air National Guard aircraft maintenance workforce, infrastructure support, and regulatory guidance. Maintains surveillance and ensures effective operation of the maintenance program. Develops CONUS and OCONUS deployment plans to meet unit mission goals, inspection schedules, and deployment requirements. Manages a resource protection program, which includes physical security, information security, and industrial and occupational safety and health. Prepares for and participates in various types of readiness evaluations. Develops group-level policy and oversees the maintenance automated information systems. Performs other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: O-5 Compatible Military Assignments: 020C0 AFSC 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant\'s RESUME must provide, in detail, how they meet each specialized experience listed below. 3. It must be documented with \"from (mm/yy)\" and \"to (mm/yy)\" dates and description of the specialized experience. DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet. You will be immediately disqualified if you fail to include specialized experience in your resume. Must have at least 12 months of Specialized Experience in each of the following: 1. Experience applying principles, concepts, and methods of equipment, facility, or service operations sufficient in planning assignments. 2. Experience using well-established occupational methods and techniques to determine facility, grounds, equipment overhaul, maintenance, restoration, repair needs, etc. 3. Experience in determination of resource needs, allocation of resources, and budgeting/funding needs. 4. Experience in human resources management policy matters affecting the entire organization, with personnel actions affecting key employees to include experience coordinating work forces and resources and negotiating with management or clients concerning problems. 5. Experience in managing the function of the work to be performed. 6. Experience which includes leading, directing and assigning work of personnel. Education Education cannot be substituted for Specialized Experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). 1. If you would like to inquire about joining the Colorado Air National Guard, please contact Recruiting Office Supervisor at 720-847-9423. 2. PCS funds are not available (unless otherwise stated). 3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337. 4. AGR positions are not announced/applied for on USA Jobs. Contact your respective AGR offices for instructions on how to apply for AGR positions. 5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.) 6. Unless stated otherwise: Must be fully qualified or able to obtain AFSC within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted AFSC listed in this announcement - you will need that AFSC to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions. 7. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates. 8. Current COANG Technicians and AGRs hired for a position in which an MCR is required will remain in their current status unless/until the MCR is approved. In the event the MCR is not approved, they are accepting the position in their current status. 9. We use E-Verify to verify the identity and employment eligibility of all persons hired.

Job Details

Jocancy Online Job Portal by jobSearchi.