Mechanic B L1-2, Electric Maintenance

Mechanic B L1-2, Electric Maintenance

24 Dec 2025
New York, New york city 00000 New york city USA

Mechanic B L1-2, Electric Maintenance

Required Education/Experience

High School Diploma/GED

Relevant Work Experience

3-5 years Building trades and ability to read schematics and engineering prints Required

Less than 2 years Experience using electronic work management platforms such as Maximo for time entry and updates to work orders Preferred

Licenses And Certfications

Driver's License Required

Physical Demands

Ability to respond to system emergencies

Able to work in all weather conditions, i.e. excessive heat and/or cold

Perform extended driving through heavy traffic and severe off-road conditions

Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs

Ability to carry tools and materials when climbing ladders and scaffolds, and entering confined spaces

Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces)

Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems

Ability to be approved to wear and use either a full or half-face respirator, without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations

Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday

Ability to use hand tools and operate heavy machinery, i.e. jackhammers

Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses

Work with equipment with a manufacturer weight rating of 350lbs

Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment

Additional Physical Demands

Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers.

EEO Statement:Consolidated Edison Company of New York, Inc. (Con Edison), Orange & Rockland Utilities (O&R), and Consolidated Edison Transmission (CET) are equal opportunity employers. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of the individual’s actual or perceived disability, protected veteran status, race, color, creed, religion, sex, age, national origin, gender, gender identity, gender expression, genetic information, marital status, sexual orientation, citizenship, domestic violence victim status, or any other actual or perceived status protected by law.Technical Difficulty Statement:For technical issues, please contact us at careerconnect@coned.com

Related jobs

  • Facilities Maintenance Supervisor

  • Assistant Director, Facility Maintenance, Transitional Housing

  • Assistant Maintenance Supervisor

  • About the Role

  • Required Education/Experience

  • Job Title: Lead Engineer - Electric System EngCompany: NY State Electric & GasWork Location Position will Reside: NY Brewster, NY binghamton (vestal), NY Ithaca, NY Oneonta, NY Liberty, NY Mechanicville, NY Plattsburgh Salary: The base salary range for this position is dependent upon experience and location, ranging from $118k to $139k, for NY Brewster $125k to $150kJOB SUMMARY:Scope of Work - Main duties, settings, geography, reporting relationships, other relationships:Leads engineering activities for electric transmission and system protection projects. Plans, controls and manages project activities to effectively complete engineering and design for construction projects. Provides liaison with other departments, divisions, vendors or consultants and coordinates with government agencies, customers, other utilities or groups. Applies and interprets company, local, state, and national codes and standards and ensures compliance with regulatory requirements. Conducts feasibility studies, completes estimates and develops Engineering criteria.MAJOR ROLES AND RESPONSIBILITIES (Scope of work - range of responsibilities):1. Performs engineering analysis of the electric transmission system and recommends actions to develop design options or recommendations for protective relay system to minimize customer outages due to equipment failure or system malfunction.2. Engineer detailed designs. Perform engineering calculations.(25%,P)3. Originates electric system and component reliability studies, outage contingency plans and capital budget proposals including a complete business case. Determines corrective action for operating deficiencies. (10%,S)4. Recommends system improvements, develops economic project proposals for improvements and provides project management for major transmission construction projects.(25%,P)5. Develops and validates information needed for engineering analyses and applies engineering judgment to solve complex technical problems. Directs engineering contractors and consultants.(15%,P)6. Demonstrates new technology and implements it to enhance power system performance. Provides power system commissioning support and supervision when required.(10%,S) 7. Provides construction management, including coordinating field construction transmission lines. Develops technical specifications, standards, contracts and purchase orders. Administers contract terms and conditions, tracks budgets and schedules, supervises field construction to ensure compliance. Approves changes within contract scope and negotiates contract settlement.(15%,P) JOB REQUIREMENTS:Education & Experience Required: Bachelor\'s degree with a minimum of 5 years relevant experience required. At least 5 years of experience in electric transmission systems planning, operations, and/or protection. Knowledge of running and analyzing electric power load flows. Knowledge of FERC and state regulations.Skills/Abilities: Able to perform circuit analysis including voltage drop capacitor and regular siting. Able to perform fault duty/motor start status. Strong analytical, interpersonal, and communication skills. Strong project management skills.#LI-DG1Competency Requirements:It is preferred that for this job, the candidate fulfills the requirements in terms of levels indicated below.1. Delivering for the Business: Global view of the Business - Competent Achieving Results and Continuous Improvements - Advanced Initiative - Competent Innovation & Creativity - Competent2. Global Relationships: Flexibility & Globalization - Competent Customer Focus - Competent Communicating & Influencing - Competent Team Work - Competent3. Managing People: Team Management - Competent Developing Others - CompetentMobility InformationPlease note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that countryAVANGRID\'s employment practices and policies are geared to hiring a diverse workforce and sustaining an inclusive culture. At AVANGRID we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law.If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at careers@avangrid.comJob Posting End Date:

  • Job Title: Lead Engineer - Electric System EngCompany: NY State Electric & GasWork Location Position will Reside: NY Brewster, NY binghamton (vestal), NY Ithaca, NY Oneonta, NY Liberty, NY Mechanicville, NY Plattsburgh Salary: The base salary range for this position is dependent upon experience and location, ranging from $118k to $139k, for NY Brewster $125k to $150kJOB SUMMARY:Scope of Work - Main duties, settings, geography, reporting relationships, other relationships:Leads engineering activities for electric transmission and system protection projects. Plans, controls and manages project activities to effectively complete engineering and design for construction projects. Provides liaison with other departments, divisions, vendors or consultants and coordinates with government agencies, customers, other utilities or groups. Applies and interprets company, local, state, and national codes and standards and ensures compliance with regulatory requirements. Conducts feasibility studies, completes estimates and develops Engineering criteria.MAJOR ROLES AND RESPONSIBILITIES (Scope of work - range of responsibilities):1. Performs engineering analysis of the electric transmission system and recommends actions to develop design options or recommendations for protective relay system to minimize customer outages due to equipment failure or system malfunction.2. Engineer detailed designs. Perform engineering calculations.(25%,P)3. Originates electric system and component reliability studies, outage contingency plans and capital budget proposals including a complete business case. Determines corrective action for operating deficiencies. (10%,S)4. Recommends system improvements, develops economic project proposals for improvements and provides project management for major transmission construction projects.(25%,P)5. Develops and validates information needed for engineering analyses and applies engineering judgment to solve complex technical problems. Directs engineering contractors and consultants.(15%,P)6. Demonstrates new technology and implements it to enhance power system performance. Provides power system commissioning support and supervision when required.(10%,S) 7. Provides construction management, including coordinating field construction transmission lines. Develops technical specifications, standards, contracts and purchase orders. Administers contract terms and conditions, tracks budgets and schedules, supervises field construction to ensure compliance. Approves changes within contract scope and negotiates contract settlement.(15%,P) JOB REQUIREMENTS:Education & Experience Required: Bachelor\'s degree with a minimum of 5 years relevant experience required. At least 5 years of experience in electric transmission systems planning, operations, and/or protection. Knowledge of running and analyzing electric power load flows. Knowledge of FERC and state regulations.Skills/Abilities: Able to perform circuit analysis including voltage drop capacitor and regular siting. Able to perform fault duty/motor start status. Strong analytical, interpersonal, and communication skills. Strong project management skills.#LI-DG1Competency Requirements:It is preferred that for this job, the candidate fulfills the requirements in terms of levels indicated below.1. Delivering for the Business: Global view of the Business - Competent Achieving Results and Continuous Improvements - Advanced Initiative - Competent Innovation & Creativity - Competent2. Global Relationships: Flexibility & Globalization - Competent Customer Focus - Competent Communicating & Influencing - Competent Team Work - Competent3. Managing People: Team Management - Competent Developing Others - CompetentMobility InformationPlease note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that countryAVANGRID\'s employment practices and policies are geared to hiring a diverse workforce and sustaining an inclusive culture. At AVANGRID we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law.If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at careers@avangrid.comJob Posting End Date:

Job Details

Jocancy Online Job Portal by jobSearchi.