Electrical / Optical Hardware Test Engineer

Electrical / Optical Hardware Test Engineer

24 Nov 2024
California, Sanjose, 95134 Sanjose USA

Electrical / Optical Hardware Test Engineer

Vacancy expired!

RESPONSIBILITIES:
Kforce is immediately seeking an experienced Electrical/ Optical Hardware Test Engineer for their global, intelligent networking and software innovation client in San Jose, California (CA).

Roles & Responsibilities:
Perform optical transceiver module validation in system level EDVT
Configure and execute tests on multiple Company switches/routers
Develop and execute tests using automation platform
Operate and debug the testing equipment and stations to resolve testing issue
Provide detailed issue details and description, and drive issues to closure
Write test report and document the test procedure and result
Work cross functionally with hardware engineers, software engineers, and external vendors to ensure robust test methodology and timely issue mitigation resulting in high product quality

REQUIREMENTS:
B.S. in Electrical Engineering or Computer Engineering with 2-4 years of relevant experience
Hands on experience with electrical and optical test and measurement equipment (traffic generators (Ixia, Spirent), optical attenuators, digital multi-meters, oscilloscopes)
Hands on experience with basic networking, including Cisco IOS/NXOS configuration
Possesses a quality-oriented mindset and attention to details
Strong troubleshooting, problem solving, analytical, and critical thinking skills

Desired Skills:
Experience with Cisco Test Tracker automation test tool
Familiarity with major electronics designs used in optical telecommunications
Good written & verbal communication skills
Ability to work well with others - both internal and external teams
Ability to learn quickly and adapt to a dynamic work environment
A "can do" attitude, independent thinking, and ability to articulate complex technical issues in an effective manner

Kforce is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Related jobs

  • Description:

  • Company:

  • Principal Test Engineer

  • Job Description

  • Tula is driven by an overriding passion to increase efficiency and improve the environment. With more than 340 patents issued or pending for multiple technologies, and a combined 450 years of engineering behind those patents, we’re focused primarily on applications for passenger automobiles, commercial vehicles for on and off road and electric vehicles of any size. Our approach to improving efficiency sets us apart. We come at it with demonstrated software solutions, and we deliver proven results with more than one million vehicles on the road using our technologies to decrease greenhouse gas emissions and increase fuel savings. But we’re not stopping there. We’re working to reduce or eliminate the use of rare earth elements in electric vehicles through improved electric motor efficiency and exploring efficiency in other means of mobility, too, including robotics, e-aviation and industrial machinery. Tula drives efficiency. The electric motor test engineer is responsible for measurement of motor performance and efficiency through the use of motor and vehicle chassis dynamometers equipped with state-of-the-art power analyzers. Support motor analysis and inverter calibration by specifying and conducting motor and vehicle dynamometer tests Validate test plans, execute tests, and verify test data are accurate and repeatable Set up, calibrate, and troubleshoot test cell instrumentation Interact with test requestors, test technicians and schedule testing according to priorities Provide guidance to the technical associates and verify their dyno work and data meets Tula’s standards Build and expand Tula internal testing and calibration capability Utilize external vendors and contractors as needed Contribute to the generation of innovative ideas and development of project plans Become the go to expert for dynamometer testing Requirements: B.S. plus three years related work experience Knowledge of experiment design Experience with at least three of the following: Matlab/Simulink, Labview/Veristand, CAS, INCA, Canalyzer, Canape, dSPACE/Control Desk, power analysis equipment, specifically HBK Genesis/Perception Understanding of electric motors and motor test methodology relevant to road vehicles Experience with motor and vehicle test equipment such as dynamometers and data acquisition hardware and software Ability to carefully validate test plans, execute dyno work according to plan, and verify the data created is of high quality Familiarity with the full range of calibration structures of motor control modules of modern electric machines Ability to set up, calibrate, and troubleshoot advanced measurement instrumentation Ability to demonstrate system level thinking/management Critical thinking skills and the ability to manage a dozen systems, each of which is required to achieve a valid test Root cause and resolution methodology Effective verbal and written communication skills including the ability to influence technical direction Demonstrated team orientation and project management skills Participate in building/refurbishment dynamometers cells Ability to thrive in a dynamic, fast-paced start-up environment Bonus Points: Experience in analysis and development of automotive motors and components Understanding of analytical tools such as motor FEA and vehicle simulation Understanding of fundamentals of modern motor control

  • Working Location: CALIFORNIA, SAN JOSE

  • Mission Processor - C RTOS

Job Details

  • ID
    JC6064503
  • State
  • City
  • Job type
    Contract
  • Salary
    Competitive
  • Hiring Company
    Kforce Technology Staffing
  • Date
    2020-11-23
  • Deadline
    2021-01-22
  • Category

Jocancy Online Job Portal by jobSearchi.