The Battery Systems Triage Engineer is responsible for supporting design and releasing teams in manufacturing and battery assembly plants. This person will work closely with the BMS SW and HW leads, Pack Integration and Module DRE, software engineers, chief engineers and build coordinators to ensure Battery successfully passes End of Line test at Pilot Plant as well as taking the lead on systems level Battery issues to drive root cause and timely resolution to support high build efficiency. Job ResponsibilitiesPerform Battery EOL testing for various HV batteries assembled in CTC Pilot plant, including assisting in issue troubleshooting and documentation/tracking of issues. Support root cause problem solving activities by analyzing EOL data with Vector CAN tools, INCA, or plant tester diagnostic tools, or by visual inspection and measurements. Support module voltage variation correction through charging, charting and managing inventory to optimize pack assembly Perform flashing of the BPCM/CSC and other communication procedures to ensure proper pairing to optimize pack assembly Aid in change control and establishment of clean points (may require part relabeling / off-line re-flashing as needed) Establish and document new requirements, best practices, and lessons learned as appropriate, with guidance from BMS engineering and Pack integration. Support pilot vehicle triage and systems level troubleshooting of the battery pack and communication on the vehicle level. 
