Supervisor Diagnostic Imaging Services - Full Time - San Diego

Supervisor Diagnostic Imaging Services - Full Time - San Diego

14 Dec 2024
California, San diego, 92101 San diego USA

Supervisor Diagnostic Imaging Services - Full Time - San Diego

Job Summary:Within a full-service Diagnostic Imaging Department, supervises the daily activities, patient flow, operations, clinical procedures and performance of Diagnostic Imaging Technologists on a regularly scheduled shift for an assigned work area/unit such as, but not limited to, diagnostic radiography, fluoroscopy, contract studies, special procedures, mammography, computed tomography, ultrasound, MRI. Integrates assigned areas/units administrative and clinical services, processes and procedures with departmental and organizational business goals/objectives.Essential Responsibilities:

Upholds Kaiser Permanente's Policies and Procedures, Principles of Responsibilities and applicable state, federal and local laws.

Schedules Technologists and patients/exams/procedures and assigns daily work.

Reviews clinical tests, documentation, records and procedures for quality and in assigned area monitors work and clinical processes, procedures and systems to ensure quality, patient care and clinical standards/goals are achieved.

Assists in the design and implementation and improvement of a department-wide quality management/assurance program.

Supervises daily work procedures and performance of D.I. Technologists.

Monitors and reviews performance of staff and participates in formal performance evaluation procedure with appropriate departmental manager.

Quality checks radiographs/film for diagnostic quality.

Analyzes D.I. Technology administrative and clinical procedures, processes and systems in terms of quality, cost, efficiency and productivity metrics and makes appropriate recommendations to modify/improve.

Implements/monitors policies, procedures standards and clinical protocols in order to ensure quality patient care.

Monitors and reports compliance on an on-going basis.

Ensures compliance with TJC, NCQA, MQSA, and other applicable local, state and national standards, requirements and regulations.

Addresses and resolves patient complaints/issues.

Ensures that supplies, tech and radiation generating equipment are utilized safely and in accordance with all departmental, organizational, local, state and federal radiation control/safety/protection requirements.

Implements and monitors radiation safety program in order to minimize radiation exposure and prevent unnecessary exposure.

Conducts regular and special radiation surveys in accordance with local, state and federal requirements.

Develops timely and accurate work load, statistical and operating reports and makes appropriate recommendations to improve productivity and utilization of staff, equipment and materials.

Resolves on a first level human resources and labor relations issues.

Assume other activities and responsibilities from time to time as directed.

Basic Qualifications:Experience

Minimum three (3) years of relevant clinical experience as a staff technologist in an acute care hospital.

Education

Associate of Arts or Science degree in Radiologic Technology Diagnostic Ultrasound from an AMA approved school OR two (2) years of experience in a directly related field.

High School Diploma or General Education Development (GED) required.

License, Certification, Registration

Radiologic Technologist Certificate (California) AND American Registry of Radiologic Technologists Certificate - Radiography

OR

Nuclear Medical Technologist Certificate (California)

OR

Nuclear Medicine Technologist Certificate from Nuclear Medicine Technology Certification Board

OR

American Registry of Radiologic Technologists Certificate - Nuclear Medicine Technologist from American Registry of Radiologic Technologists

OR

Registered Diagnostic Medical Sonographer Certificate from American Registry of Diagnostic Medical Sonographers

Additional Requirements:

Specific certification in any of the disciplines maybe required as determined by the hiring manager.

Experience supervising and/or reviewing the clinical work performed by D.I. Technologists.

Demonstrated ability to utilize communication, inter-personal, labor relations and work planning skills.

Demonstrated knowledge of all applicable local, state and federal regulatory and radiation safety standards and requirements.

Must be able to work in a Labor/Management Partnership environment.

Preferred Qualifications:

N/A.

Notes:

Required RDCS Cert for Adult Echo Tech. Required travel to all Cardiology locations.

COMPANY: KAISERTITLE: Supervisor Diagnostic Imaging Services - Full Time - San DiegoLOCATION: San Diego, CaliforniaREQNUMBER: 1327229External hires must pass a background check/drug screen. Qualified applicants with arrest and/or conviction records will be considered for employment in a manner consistent with Federal, state and local laws, including but not limited to the San Francisco Fair Chance Ordinance. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, protected veteran, or disability status.

Related jobs

  • Job Summary:

  • Full-Time Retail Supervisor (Benefits, Quarterly Bonus Potential & $20/hr Starting Base Pay)

  • Facility: Memorial Metropolitan

  • Title: MAINTENANCE MECHANIC - NAVY GATEWAY INNS & SUITES SAN DIEGO, FULL TIME (35-40 HOURS) Location: United States-California-San Diego Job Number: 240003PF Do you desire a career with growth potential? Come work for us as a FEDERAL EMPLOYEE and help support our mission by providing customers with quality goods and services at a savings to support quality of life programs for active-duty military, retirees, reservists, and their families! By choosing to work for the NEXCOM Enterprise, you will enjoy one of the best benefit packages available anywhere: PAID ANNUAL AND SICK LEAVE MEDICAL/DENTAL INSURANCE FLEXIBLE SPENDING ACCOUNT PENSION PLAN 401K SAVINGS PLAN - UP TO 3% MATCH LIFE INSURANCE TAX FREE SHOPPING PRIVILEDGES FREE BUS PASSES/FREE PARKING DISCOUNTED TICKETS AT MWR ACCESS TO NAVY LODGE HOTELS WORLDWIDE Job Summary: Performs various maintenance tasks involving construction and alteration repairs of NEXCOM Hospitality Group NHG buildings and equipment. Plans and lays out work in accordance with drawings sketches blue-prints and own knowledge of construction or needed repairs. Duties and Responsibilities: Performs work in at least three of the following trades in the maintenance and repair of buildings and related fixtures: Plumbing: Makes plumbing repairs to sinks, faucets, commodes, tanks, urinals, P- traps, shut-off valves washing machines and water supply that can be accomplished by removing, cleaning, resealing, replacing defective parts or units. Installs water heaters, garbage disposals, faucets and sinks. Involves installing, modifying, and repairing new and existing utility, supply, and disposal systems and equipment, water closets, tubs, fire sprinkler systems, and showers. Works from building plans, blueprints, and sketches to plan and lay out the routing, placement, slant, slope, fall, and proper operation of systems and equipment. Installs, modifies, and repairs systems like those described above by locating and tapping main lines, setting up system routes, placing and cutting route openings, placing hangers for proper level and slope, and determining and installing valves, traps, and unions needed for proper operation of systems. Washer/Dryer repair: Performs routine maintenance on washers and dryers to include cleaning lint ducts and vents, replacing hoses and fittings as required, and referring more complex problems to supervisor for action. Heating, Ventilation and Air Conditioning (HVAC): Recognizes cause of faulty equipment and makes repairs on a variety of HVAC units. Installs equipment, recognizes the causes of faulty equipment, and makes repairs on a variety of domestic and commercial refrigeration and air conditioning units and systems. The systems are used to condition areas and to cool equipment such as water dispensers, and small structures or areas that use unit comfort coolers, window units and other similar equipment. Mechanics work from oral instructions, blueprints, and work orders. They trace and locate defects to determine the type and extent of repair needed and they plan the work, select the proper tools and testing devices and accomplish repairs according to accepted trade practices. Electrical: Repairs are accomplished by removing, replacing, tightening, splicing, soldering and insulating defective wiring, controls, equipment, and fixtures such as broken and bare wiring, burned out switches, and relays, loose connections and fittings, damaged light fixtures, and poorly operating thermostats. Replaces fluorescent and incandescent ballasts, bulbs and tubes. May install or repair electrical systems incidental to the construction or maintenance of facilities. Receives work orders, oral instructions, and wiring diagrams that indicate the nature of the repair or installation to be made, the layout and placement of circuitry, fixtures, and controls, and the types of wiring, parts, and equipment installed. They locate broken, worn, damaged, or poorly operating wiring, fixtures, controls, and equipment through visual check or through use of a small variety of test equipment, for example, test lamps, voltage testers, ammeters, and polarity testers. They complete needed repairs to installed systems, and rearrange and hook up items such as outlets, switches, light fixtures, regulators, and circuit breakers. Carpentry: Uses skilled techniques to construct, install, repair, and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness. Constructs and repairs a wide variety of structural items such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim, and miscellaneous items such as workbenches, counter tops, bookcases, equipment cabinets, computer consoles, and items requiring limited decorative trim and molding. Set up and operate a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and uses glues and adhesives to secure wood pieces, veneers, and counter tops. Uses wood, metal, and various composite materials when installing or replacing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determine the layout and work sequences and types of lumber or special related materials. Plan and carry out projects from initial layout to completion. Painting: Coating work is accomplished by any of the accepted methods of the trade including special finishing techniques such as marbling and graining, by using coating materials that are prepared in special as well as common ways, and by applying coating techniques that ensure surfaces have a smooth textured and decorative appearance and meet thickness and level requirements. Incumbent determine the methods, techniques, devices, and materials that are best suited to the surface finish required, for example, glossy finish, grained effect, or a finish that must meet specified thicknesses and levels. Prepares surfaces by methods such as smoothing with pumice and rottenstone, filling, shaping, and leveling with metal and synthetic resins, and mixing and applying pre-coating agents, for example, pickling and alkali compounds. They prepare coating materials by tinting, toning, matching, blending, and mixing in various additives. Applies coating materials with any of the accepted trade devices including those designed to give special effects, for example, brushes, rollers, spray guns, and graining devices. They see that the coating finish meets match, texture, decorative, thickness, and level requirements. Performs other related duties as assigned. This position is covered by American Federation of Government Employees, Local 1235 Union Agreement. Qualifications: GENERAL EXPERIENCE: One year of experience that provided the applicant with knowledge of general maintenance practices involving the upkeep of buildings grounds fixtures equipment etc. SUBSTITUTION OF EDUCATION FOR EXPERIENCE: One year of high school education may be substituted for 3 months of general experience up to a High School Diploma or GED for one year of general experience. SPECIALIZED EXPERIENCE: Three years of general maintenance work in involving variety of trade practices associated with such occupations as air conditioning and refrigeration electrical work plumbing carpentry masonry and painting etc. Including knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, chemicals and basic safe work practices. PHYSICAL REQUIREMENTS: Standing stooping bending kneeling climbing and work in tiring and uncomfortable positions. Frequently lifts and carries material weighing up to 50 pounds. A recognized professional certification or license in one trade (plumbing, HVAC, electrical, carpentry, or painting) trade is preferred.

  • Systems Engineer - Full Time - San Diego Zoo Wildlife Alliance

  • Job Summary:

  • Overview

Job Details

Jocancy Online Job Portal by jobSearchi.